Description
Overview:
This 2.4m Fall Protection 50mm Ratchet Strap With Snap Hooks is a restraint strap used to help prevent falls when working on flatbed vans, vehicles and trailers. It creates a temporary connection between approved anchorage points, allowing the user to set and maintain a safe working position. The strap uses 50 mm (2 inch) polyester webbing with a steel ratchet tensioner and steel snap hooks at each end for fast attachment. The ratchet provides controlled adjustment to set the effective working length as required on site. This is a Non-Genuine compatible part intended for general fall restraint systems where an adjustable tie-off is needed. Use with compatible anchor points and PPE rated for working at height. Not a substitute for an energy-absorbing fall arrest lanyard.
Key Features:
- Length: 2.4 m overall reach for vehicle and trailer decks.
- Webbing width: 50 mm (2 in) for stable load distribution.
- Ratchet mechanism for controlled tensioning and quick adjustment.
- Snap hooks at both ends for rapid, positive connections.
- Steel ratchet and hooks for dependable mechanical strength.
- Polyester webbing minimises stretch under normal working loads.
- One-piece assembly for straightforward setup and removal.
- Intended for restraint use; not suitable for fall arrest.
- Interfaces with common anchor rings and rail points.
- Not for lifting, towing, or cargo securing tasks.
- Visual inspection recommended before each use; retire if damaged.
- Non-Genuine compatible part for general fall restraint systems.
Typical Applications:
Used to set up a temporary restraint line on flatbed vans, lorries and trailers during loading, sheeting, or maintenance tasks. The strap connects to suitable anchor rings or rails and is tensioned with the ratchet to limit user movement near open edges. Apply as part of a working-at-height system designed for restraint, alongside compatible harnesses, connectors and anchor points. Do not use for fall arrest where an energy absorber is required.
Also known as:
Fall restraint ratchet strap, vehicle fall protection strap, snap hook ratchet strap for restraint, flatbed safety restraint strap, 2.4 m ratchet restraint lanyard, anchorage ratchet strap with snap hooks, 50 mm fall restraint tie-off strap.
Product Specifications
| L&S Part No. | LSF2 |
|---|---|
| Unit of Sale | 1 |
