Description
Overview:
This 8m Fall Protection 50mm Ratchet Strap With Snap Hooks is a webbing-based restraint line for working at height on flatbed vans, trucks, and trailers. It is used to set up a temporary edge restraint or barrier to reduce fall risk during loading, unloading, sheeting, or securing tasks. The assembly uses 50 mm (2 in) polyester webbing for durability under outdoor use, a steel ratchet tensioner for positive locking, and steel snap hooks at both ends for quick connection to compatible anchor points. The 8 m (26 ft 3 in) reach suits most vehicle bed widths and working areas. This is a Non-Genuine universal accessory intended for general site use where a simple, adjustable restraint line is required.
Key Features:
- Length: 8 m (26 ft 3 in) adjustable
- Webbing width: 50 mm (2 in)
- Polyester webbing for outdoor and site conditions
- Steel ratchet mechanism with locking pawl
- Steel snap hooks at both strap ends
- Quick connection to vehicle lashing rings or anchor points
- Creates a temporary horizontal restraint or barrier line
- Non-Genuine universal accessory, not OEM-specific
- Compact to store in vehicle or site toolbox
- Simple manual tensioning and release operation
- Broad 50 mm webbing spreads contact pressure
- Suitable for flatbed vans, trucks, and trailers
- Not for lifting, towing, or load slinging
- Supports safe working practices during loading and sheeting
- Supplied as a single, complete strap assembly
Typical Applications:
Used on flatbed vans, rigid trucks, and trailers to set up a temporary restraint or barrier line while loading, unloading, sheeting, or securing loads and equipment. Helps define safe working zones near open edges on vehicle beds. Use only with suitable anchor points and in conjunction with site risk assessments and appropriate PPE where required.
Also known as:
Fall restraint strap, safety line with ratchet, snap hook ratchet strap, vehicle edge restraint, temporary barrier strap, horizontal restraint line, flatbed safety strap, tie-down strap with snap hooks.
Product Specifications
| L&S Part No. | LSF8 |
|---|---|
| Unit of Sale | 1 |
