In this video, we show you how to change the Air Filter on a Husqvarna K760.

Health & Safety Warning - Please ensure that you have safely prepared the machine and workspace. If you are unsure about any aspect of the task please seek professional advice.

Transcript

Today, we're going to change the air filter on a Husqvarna K760 Disc Cutter. First of all, remove the air filter cover by removing the three screws with a torx spanner. Then there are two torx screws to be undone to release the air filter. You can then remove the air filter gauze behind it.Then simply place your new gauze filter into position as shown. Place your new air filter into the air filter base. Make sure the plastic Husqvarna logo on the filter is orientated as shown. Tighten the screws with a torx spanner and check the seal is in tact. Place the casing back over the filter and tighten. Be careful not to tighten too much into the plastic. That's how you change the air filter on a Husqvarna K760 Disc Cutter. When placing your new air filter into the air filter base, make sure the plastic Husqvarna logo on the filter is orientated as shown. Then place your new air filter into the air filter base. Tighten the screws with a torx spanner and check the seal is in tact.

Parts

Parts and tools included in the K760 how-to video.

• N/G Paper Air Filter - 760 110
• Air Filter Element - 525 47 06 02
• N/G Filter Service Kit - 760 182
• Combination Tool - 506 38 26 01