In this video, we show you how to fit the handle and control handle on a Stihl FS410C Clearing Saw.

Health & Safety Warning - Please ensure that you have safely prepared the machine and workspace. If you are unsure about any aspect of the task please seek professional advice.

Transcript

Today we're going to fit a handle and control handle on a Stihl FS410C Brushcutter. The handle has a simple twist and lock mechanism fitted to the handle as you can see. Fit the handle onto the bottom of the body of the machine. Once in place, twist the lock to secure it. When it's tight, push the lock down to keep it in place. You can also edit the positioning of the handle for different jobs. To fit the control handle, remove the screw from the base. The screw will have to feed through the handle as well as the metal bar. Force the handle down the pole to where the two holes are in line. Once in line push in the screw and secure it by screwing it in. That's how you fit a handle and control handle on a Stihl FS410C.

Parts

Parts and tools included in the FS410C clearing saw how-to video.

• Handle Bar & Handle - 4147 790 1702
• Handle - 4147 791 0301
• Control Handle - 4148 790 1303
• Throttle Cable - 4147 180 1100
• Non Genuine Torx Wrench/Plug Spanner - 410 250