Description
Overview:
This is a chrome plated locking lever handle (MPN 800 1261) for vehicle and equipment access doors, lockers and panels. Manufactured from zinc die-cast with a bright chrome finish, it is designed for robust service on commercial bodies and enclosures. The handle uses mixed keys (each lock keyed differently) for added fleet security. Mounting is by two countersunk fixings on 44.5 mm (1.75 in) centres, and the handle drives an 8 mm square spindle measuring 125.5 mm (4.94 in) in length to operate the latch mechanism. Overall dimensions are 179 mm (7.05 in) in length, 97 mm (3.82 in) in width and 52 mm (2.05 in) in depth. A neoprene gasket is supplied to help seal the flange to the panel and reduce water ingress. Suitable for new build or replacement on trucks, trailers, buses, generator sets, horseboxes and cab lockers where a durable locking lever is required.
Key Features:
- Zinc die-cast construction for durability with a chrome plated finish for surface protection
- Locking type with mixed keys (non-keyed-alike) for individual lock profiles across a fleet
- Hole centres: 44.5 mm (1.75 in) for through-panel mounting
- Fixing holes: Ø5.5 mm (approx. 0.22 in, 7/32 in) countersunk for flush screw heads
- Square spindle: 8 mm (approx. 5/16 in) across flats, 125.5 mm (4.94 in) length
- Overall size: 179 mm (7.05 in) length x 97 mm (3.82 in) width x 52 mm (2.05 in) depth
- Supplied with a neoprene gasket to help seal against the door or panel
- Suits steel, aluminium or composite body panels on commercial vehicles and equipment
- Designed for lever-operated latching mechanisms on access doors and lockers
Typical Applications:
Commonly fitted to truck and trailer body side lockers, rear access doors, bus and coach service panels, generator set enclosure doors, horsebox lockers and cab storage compartments. Used wherever a lever-operated, key-locking handle with 44.5 mm fixing centres and an 8 mm drive spindle is required on plant transport and commercial vehicle bodies.
Also known as:
Locking lever latch; Vehicle body door handle; Chrome lever latch; 8 mm square spindle handle; Cab locker handle
Product Specifications
| L&S Part No. | 800 1261 |
|---|---|
| Unit of Sale | 1 |
