Description
Overview:
The Bulb Trailer Light Board 1.5 m with 6 m Cable and Twin Fog Lamps (MPN 763 953) provides a complete rear lighting assembly for small trailers and plant transport where a temporary or replacement light board is required. The board carries two four-function bulb lamps to provide stop, tail, indicator and number plate illumination, plus twin rear fog lamps and triangular reflectors for conspicuity. Supplied with a 7‐pin 12 V plug, it connects to standard towing electrics on cars, vans and light commercials. The board length is approximately 1.5 m (about 4 ft 11 in), and the cable length is approximately 6 m (about 19 ft 8 in) to reach from the rear of the trailer to the tow vehicle. E‐approved components and UK manufacture support reliable service in fleet, hire and workshop environments where straightforward, serviceable bulb fittings are preferred.
Key Features:
- E‐approved lighting and reflectors for road use
- Board length: approx. 1.5 m (about 4 ft 11 in)
- Cable length: approx. 6 m (about 19 ft 8 in)
- 12 V, 7‐pin plug (MP21B) for standard towing sockets
- Two 4‐function bulb lamps: stop/tail/indicator/number plate (MP17B)
- Two rear fog lamps for low‐visibility conditions (MP22B)
- Two red triangular reflectors for rear conspicuity (MP16B)
- Bulb‐type lamp assemblies (non‐LED)
- Manufactured in the UK
- Supplied bagged with barcode for easy identification
Typical Applications:
Used as a rear lighting board on general‐purpose and plant trailers where the original lights are obscured or a board is specified. Suitable for towing setups using a 12 V 7‐pin socket on cars, vans and light commercials. Incorporates Maypole component references MP17B (4‐function lamps), MP22B (fog lamps), MP16B (reflectors) and MP21B (7‐pin plug).
Also known as:
Trailer Light Board
Lighting Board 1.5 m
7‐Pin Trailer Lighting Board
Bulb Trailer Lightboard
Twin Fog Trailer Board
Maypole part number MP258P
Product Specifications
| L&S Part No. | 763 953 |
|---|---|
| Part Type | Genuine Part |
