Description
Overview:
This trailer swivel jack, 1000 kg, 350-500 mm (MPN 763 791) is a heavy-duty support leg for plant, tipper and general equipment trailers. It uses a 50 x 50 mm (approx. 2 x 2 in) outer square tube and provides stable lifting and levelling when coupling, parking or carrying out maintenance. The jack rotates up for travel when fitted to the correct chassis mounting plate, saving space and reducing the risk of damage. A ball-jointed foot helps maintain contact on moderately sloping or uneven ground. The body has a yellow passivate finish, with the matching mounting plate and pin specified in clear zinc plating. With a maximum static load of 1,000 kg (about 1.0 tonne / 2,205 lb) and a mounting plate centre height range of 300-450 mm (11.8-17.7 in), it suits demanding trailer applications, including many Ifor Williams fitments where a 50 mm square swivel jack is required.
Key Features:
- Max static load: 1,000 kg (approx. 1.0 tonne / 2,205 lb)
- Height/extension range: 350-500 mm (13.8-19.7 in)
- Mounting plate centre height from ground: 300-450 mm (11.8-17.7 in)
- Outer tube: 50 x 50 mm square (approx. 2 x 2 in)
- Handle location: above the foot for straightforward operation
- Swivels on a chassis-mounted plate for stowage when not in use
- Ball-jointed foot for use on moderately sloping or uneven ground
- Body finish: yellow passivate; plate and pin specified clear zinc plated
- Supplied without chassis mounting plate and pin; use Maypole MP4397 (mounting plate) and MP43975 (pin & chain) as required
- Suitable for Ifor Williams applications and for plant or tipper trailers
- Add grease before first use to ensure correct operation and service life
Typical Applications:
Used on trailer drawbars or A-frames to support the front end during coupling, uncoupling, levelling and routine servicing. Common on plant and tipper trailers, with suitability for many Ifor Williams applications requiring a 50 mm square swivel jack. When installed with the correct chassis plate, the jack rotates up for transport and down for use.
Also known as:
Trailer Support Leg; Swivel Support Jack; Drop-Leg Jack; Landing Leg; Maypole part number MP4395
Product Specifications
| L&S Part No. | 763 791 |
|---|---|
| Part Type | Genuine Part |
| Key Features | - Max static load capacity: 1,000 kg - Height extension range: 350-500 mm - Outer tube dimensions: 50 x 50 mm square - Swivels on chassis-mounted plate for stowage - Ball-jointed foot for uneven ground stability |
