In this video, we show you how to change a fuel filter on a Stihl TS410 disc cutter.

Health & Safety Warning - Please ensure that you have safely prepared the machine and workspace. If you are unsure about any aspect of the task please seek professional advice.

Transcript

Today, we're going to change the Fuel Filter on a Stihl TS410 cut off saw. First of all, make sure you take all precautions before working around fuel & fumes. Unlock the Fuel Tank Cap and make sure the tank is empty of fuel. For easier access, you can remove the cap by releasing the ball that tethers it to the machine. Then locate the fuel filter inside the tank and begin to pull it out of the tank, you may need to use a tool to reach the hose. Once located, pull out the fuel filter so it's hanging outside of the machine. Remove the old fuel filter by simply pulling it from the rubber tubing. Attach your new fuel filter onto the rubber tubing by pushing it into the hose. Then replace the filter back into the tank. Whilst you are looking at this part of the machine, you may want to check the two seals on the fuel cap, making sure they haven't become worn or started to deteriorate. This is important to check as tired seals make cause fuel leaks. When refitting the cap, remember to clip the tether back onto the tank.That's how you change the Fuel Filter on the Stihl TS410. All the parts & tools needed for this task are listed in the description below.

Parts

Parts and tools included in the TS410 disc cutter how-to video.

• Fuel Pick Up Filter - 0000 350 3506
• Fuel Filter - LF4005
• Genuine Air Filter Hose - 4238 358 7700
• Genuine Air Filter Hose (Per Meter) - 0000 930 2803
• Blue Nitrile Disposable Gloves - Varied Sizes