Description
Overview:
The Ball Bearing 6302vvcmps2s is a genuine Hikoki/Hitachi deep-groove radial ball bearing designed to support rotating shafts and reduce friction in high-speed power tools and construction equipment. Built from high-grade bearing steel with double non-contact rubber seals (VV) on both sides, it is factory pre-lubricated for long service life and minimal maintenance. Standard 6302 sizing (15 mm internal diameter x 42 mm outside diameter x 13 mm width) provides a precise fit for many housings and shafts across the Hikoki/Hitachi range. Common uses include armature and spindle support in grinders and demolition tools, helping to maintain smooth running, reduce heat, and protect internal components from dust and debris. Ideal for models such as the G23SWU Disc Grinder and G18SE4. OEM No. 6302VV.
Key Features:
- Genuine Hikoki/Hitachi part for assured compatibility and performance
- Deep-groove design for high radial load capacity and smooth rotation
- Double sealed (VV) to resist dust and slurry ingress in harsh environments
- Factory pre-lubricated for long service intervals and reduced downtime
- Standard 6302 size: 15 mm ID x 42 mm OD x 13 mm width
- Durable bearing steel construction for wear resistance and longevity
- Stable at grinder speeds and suitable for frequent start/stop cycles
- Consistent fit in OEM housings for easier press-in installation
- Helps restore tool efficiency, reduce noise, and protect gears and armatures
- OEM No. 6302VV for straightforward identification and replacement
Typical Applications:
Used in angle grinders, cut-off saws, demolition hammers, and rebar cutters/benders to support armature, pinion, or gearbox shafts. Suited to dusty, abrasive sites where sealed bearings extend service life. A dependable maintenance replacement to restore smooth running, reduce vibration, and protect adjacent components.
Also known as:
6302VV ball bearing, 6302 sealed bearing, 6302 (15x42x13) deep-groove ball bearing, radial sealed bearing 6302, OEM 6302VV.
Fits Models:
CC 12Y, CC12Y, CM 6, CM 7MR, CM 7MRU, CM 9SR, CM 9UBY, CM6, CM7MR, CM7MRU, CM9SR, CM9UBY, G 18SCY, G 18SE4, G 18SEY, G 18SR, G 18SS, G 18ST, G 18SW2, G 18UBY, G 18UDY, G 23SC4, G 23SCY, G 23SCY2, G 23SEY, G 23SR, G 23SRU, G 23SS, G 23ST, G 23SU, G 23SW2, G 23SWU, G 23SWU2, G 23UAY, G 23UBY, G 23UCY, G 23UDY, G 23UDY2, G18SCY, G18SE4, G18SEY, G18SR, G18SS, G18ST, G18SW2, G18UBY, G18UDY, G23SC4, G23SCY, G23SCY2, G23SEY, G23SR, G23SRU, G23SS, G23ST, G23SU, G23SW2, G23SWU, G23SWU2, G23UAY, G23UBY, G23UCY, G23UDY, G23UDY2, H 65SB2, H 65SB3, H 65SC, H 65SD2, H 65SD3, H 70SA, H 70SD, H65SB2, H65SB3, H65SC, H65SD2, H65SD3, H70SA, H70SD, PDH-180C, PDH-205A, PDH180C, PDH205A, PH-65A, PH65A, VB 16Y, VB16Y, VB3616DA
Alternate Part Numbers:
6302VV
Product Specifications
| L&S Part No. | HKK6302VV |
|---|---|
| Part Type | Genuine Part |
| Manufacturer | Hikoki |
| OEM No. | 6302VV |
| Unit of Sale | 1 |
| Machine Type | Angle Grinder, Breakers, Disc Cutters |
| Fits Brands | Hikoki |
| Key Features | - Standard 6302 size: 15 mm ID x 42 mm OD x 13 mm width - Double sealed (VV) for dust and slurry resistance - Factory pre-lubricated for extended service intervals - Compatible with Hikoki/Hitachi grinders and demolition tools - Durable bearing steel for wear resistance and longevity |
| Fits Models | CM9SR | G18SCY | G18SE4 | G18UDY | G23SC4 | G23SCY | G23SR | G23ST | G23SW2 | G23UBY | G23UCY | H65SB3 | H65SD3 | H70SA | H70SD | VB16Y | VB3616DA |
Reviews
Ask a Question
Compatibility
Customers also bought
-
![]()
Key Tag Assortment 50pc Sealey Part No. SKTAG50£5.96 £4.97
Related Products
-
![]()
Stand Assembly Complete for Belle Minimix 150£173.16 £144.30
