Description
Overview:
The Steel Bush 40x50x40mm is a cylindrical sleeve used in the pivot joints of excavators and mini diggers to support a pin, minimise friction, and restore smooth movement. Made from durable steel, it is suited to heavy on-site use where shock loads and frequent articulation are common. With a 40 mm inner diameter, 50 mm outer diameter, and 40 mm length, it is a practical replacement size for many bucket linkage positions. It is a good fit for popular compact machines such as the KX91-2 and EX30, among others. This bush is designed as a direct replacement for MPN 200 945 and cross-references to common aftermarket numbers where applicable. Always check the pin and housing sizes before fitting.
Key Features:
- Robust steel construction for long service life in abrasive, high-load conditions
- 40 mm ID x 50 mm OD x 40 mm length for straightforward like-for-like replacement
- Helps reduce play in joints, improving digging accuracy and control
- Smooth running surface supports rotational movement and limits wear on pins and housings
- Suitable for bucket linkage and similar pivot points on mini and midi excavators
- Machined to consistent tolerances for a reliable press-fit in a correctly sized bore
- Direct replacement reference: MPN 200 945
- Cross-references available to support parts identification and sourcing
- Simple to install with standard workshop tools as part of routine pin-and-bush maintenance
- Cost-effective way to extend the working life of pins, bores, and associated components
Typical Applications:
Used during bucket linkage overhauls and routine maintenance to replace worn bushes, remove slack, and restore accurate articulation. Common in dipper-end joints, bucket ears, and similar pivot points exposed to soil, grit, and impact loads. Suitable for construction, utilities, landscaping, plant hire, and groundworks where compact excavators operate daily.
Also known as:
Pivot bush, pin bush, sleeve bearing, plain bearing sleeve, bucket linkage bush, excavator pivot sleeve, bearing liner, pivot pin sleeve, linkage bearing, cylinder eye bush.
Fits Models:
802, 802.7, 802.7 PLUS, 802.7 SUPER, 802.7PLUS, 802.7SUPER, 8025, 8025 ZTS ORFS, 8025CTS, 8025ZTS, 8025ZTSORFS, 8026 CTS, 8026CTS, 8027, 8027Z, 803, 803 MAGNUM, 803 PLUS, 803 SUPER, 8030, 8030 ZTS ORFS, 8030ZTS, 8030ZTSORFS, 8032, 8032Z, 8035, 8035 ZTS ORFS, 8035ZTS, 8035ZTSORFS, 803MAGNUM, 803PLUS, 803SUPER, 804, 804 PLUS, 804 SUPER, 804PLUS, 804SUPER, EX30, EX30-2, EX302, EX35, KH101, KH90, KX101, KX101-2, KX1012, KX121, KX121-2, KX1212, KX91, KX91-2, KX91-3, KX912, KX913, TB035, TB135, U30, U35, ZX30
Alternate Part Numbers:
232/02008, 23202008
Product Specifications
| L&S Part No. | 200 945 |
|---|---|
| Unit of Sale | 1 |
| Size | I.D:40mm O.D: 50mm Length: 40mm |
| Applications | 802, 802.7, 802.7 PLUS, 802.7 SUPER, 802.7PLUS, 802.7SUPER, 8025, 8025 ZTS ORFS, 8025CTS, 8025ZTS, 8025ZTSORFS, 8026 CTS, 8026CTS, 8027, 8027Z, 803, 803 MAGNUM, 803 PLUS, 803 SUPER, 8030, 8030 ZTS ORFS, 8030ZTS, 8030ZTSORFS, 8032, 8032Z, 8035, 8035 ZTS ORFS, 8035ZTS, 8035ZTSORFS, 803MAGNUM, 803PLUS, 803SUPER, 804, 804 PLUS, 804 SUPER, 804PLUS, 804SUPER, EX30, EX30-2, EX302, EX35, KH101, KH90, KX101, KX101-2, KX1012, KX121, KX121-2, KX1212, KX91, KX91-2, KX91-3, KX912, KX913, TB035, TB135, U30, U35, ZX30 |
| Machine Type | Excavators |
| Fits Models | KX91 | KX91-3 | KX101 | KX121 | KX121-2 | U30 | U35 | 802 | 803 | 804 | 8025 | 8027 | 8030 | 8032 | 8035 | TB035 | TB135 | KX101-2 |
