Description
Overview:
This left hand slam lock with no handle and no safety catch (MPN 800 1293) is a pressed mild steel unit designed for secure, simple closure of doors and access panels on commercial and specialist vehicles. The body is zinc plated for corrosion resistance and durability, with a brass tongue for smooth, reliable engagement. Operation is via an 8 mm square drive (0.31 in), allowing straightforward actuation with appropriate hardware. The lock measures 111 mm (4.37 in) in length, 61 mm (2.40 in) in width and 14 mm (0.55 in) in body thickness, with a 16 mm (0.63 in) tongue. Fixing is through countersunk mounting holes to suit Ø5.5 mm (0.22 in) fasteners. Intended for trucks, trailers, buses, generator enclosures and similar equipment, this left hand variant is suited to body side doors, lockers and service panels where a positive "slam-to-close" action is required.
Key Features:
- Left hand orientation slam lock for panel and door closures
- No integral handle and no safety catch for direct slam-to-close use
- Pressed mild steel construction with zinc plated finish for corrosion resistance
- Brass tongue, 16 mm (0.63 in), for smooth latch engagement
- 8 mm square drive (0.31 in) actuation
- Overall length 111 mm (4.37 in); width 61 mm (2.40 in); body thickness 14 mm (0.55 in)
- Fixing via Ø5.5 mm (0.22 in) countersunk mounting holes
- Suitable for use on commercial vehicle bodies and enclosures
- Brand: Albert Jagger
Typical Applications:
Used on trucks, trailers, buses and horseboxes for body side doors, lockers and access panels; on generator sets and other equipment enclosures; and within cabs and service compartments where a robust, left hand slam action latch is required without a secondary safety catch.
Also known as:
Slam latch, Panel door latch, Pressed steel slam lock, Locker latch, Truck body slam lock
Product Specifications
| L&S Part No. | 800 1293 |
|---|---|
| Unit of Sale | 1 |
