Description
Overview:
These zinc-plated repair washers are flat, wide-diameter washers designed to spread the load of a fastener and protect the surface beneath. Made from zinc-plated steel for corrosion resistance, they are suitable for indoor and outdoor use on construction fixings, automotive bodywork, plant equipment and garden machinery panels. Each washer has an inner diameter of 5/16 inch (7.9 mm) and an outer diameter of 1 inch (25.4 mm), giving a large bearing area to prevent pull-through on thin sheet, timber and plastics. Use them with bolts, set screws or machine screws of matching size to stabilise joints, cover enlarged holes and extend the life of assemblies. Supplied in a workshop-friendly pack of 200 for convenient stocking on site or in the garage.
Key Features:
- Zinc-plated steel for reliable corrosion resistance in outdoor and damp environments
- Inner diameter 5/16 inch (7.9 mm) and outer diameter 1 inch (25.4 mm) for maximum load spread
- Helps prevent fastener heads and nuts from sinking into soft or thin materials
- Useful for repairing oversized or worn holes and covering irregularities around fixings
- Flat faces sit square under fastener heads for a secure, even clamp
- Suitable for bolts, set screws and threaded studs of corresponding size
- Simple to fit with standard hand tools; no special adapters required
- Consistent dimensions across the pack for repeatable, professional results
- Bulk pack of 200 offers good value for workshops, vans and site kits
Typical Applications:
Ideal for bodywork repairs, fixing guards and panels on mowers and machinery, securing brackets to sheet metal, distributing loads on timber framing, fencing and cladding, and stabilising fixings in plastics and composites. Common on automotive and trailer repairs, HVAC ducting, racking, signage, and general maintenance where a larger bearing surface is needed.
Also known as:
Penny washers, fender washers, mudguard washers, large OD washers, spreader washers, body washers, flat repair washers, wide face washers.
Product Specifications
| L&S Part No. | 903 1005 |
|---|---|
| Unit of Sale | Pack of 200 |
| Key Features | - Zinc-plated steel for corrosion resistance - Inner diameter 5/16 inch (7.9 mm) - Outer diameter 1 inch (25.4 mm) - Suitable for bolts, set screws, threaded studs - Pack of 200 for convenient stocking |
