Description
Overview:
This throttle cable with male M8 x 0.75 end is a control cable for Husqvarna BG-series walk-behind power trowels. It links the handlebar throttle lever to the engine governor or carburettor, allowing accurate engine speed control during start-up, edging and finishing work. The cable measures 1970 mm (1.97 m), approximately 77.6 inches (6.46 ft), providing the correct reach for factory routing on BG 375 and BG 475 machines. Construction uses a steel inner wire within a flexible protective sheath suited to site conditions. This is a Genuine Husqvarna OEM replacement part, supplied under OEM No. 546 27 14-02, ensuring correct fit at the control bracket via the M8 x 0.75 fine-pitch male thread.
Please Note: This Throttle Cable is compatible with Throttle Lever: 548 48 48 01
Key Features:
- Compatible with Throttle Lever: 548 48 48 01
- Overall length: 1970 mm (1.97 m), approximately 77.6 inches (6.46 ft)
- Thread: M8 x 0.75 male fine pitch for secure bracket attachment
- Genuine Husqvarna OEM replacement, matches original routing and travel
- Direct replacement for OEM No. 546 27 14-02
- Compatible with BG 375 and BG 475 power trowels
- Male end simplifies installation at throttle lever or governor linkage
- Provides accurate engine speed control from idle to finishing speeds
- Steel inner cable with protective outer sheath for site use
- Fine M8 thread reduces loosening under vibration when correctly fastened
- Suitable cable length for factory routing on BG-series handles
- Corrosion-resistant finish aids reliability in wet concrete environments
Typical Applications:
Used on Husqvarna BG 375 and BG 475 power trowels to transmit motion from the handle throttle lever to the engine governor or carburettor. Helps maintain consistent engine rpm for concrete finishing, edging and transport. Suitable for general site conditions with vibration, dust and moisture.
Also known as:
Throttle control cable, accelerator cable, governor control cable, engine speed cable, M8 x 0.75 male throttle cable, power trowel throttle cable.
Fits Models:
BG 375, BG 475
Alternate Part Numbers:
546 27 14-02, 546 27 14 02, 546271402
Product Specifications
| L&S Part No. | 546 27 14 02 |
|---|---|
| Part Type | Genuine Part |
| Manufacturer | Husqvarna |
| OEM No. | 546 27 14 02 |
| Unit of Sale | 1 |
| Machine Type | Trowels |
| Fits Brands | Husqvarna |
| Key Features | - Fits Husqvarna BG 375 and BG 475 trowels. - Throttle control cable for engine speed adjustment. - Cable length 1970 mm. - Male threaded end M8 x 0.75 pitch. - Genuine Husqvarna OEM part, number 546 27 14-02. |
| Fits Models | BG 375 | BG 475 |
