Description
Overview:
Budget Lock Striker Plate (MPN 800 1073) in pressed mild steel for use with budget locks on commercial vehicles and equipment enclosures. The plate is 1.5 mm (0.06 in) thick for a robust, low‐profile striker/keeper surface and is zinc plated with a clear passivated finish to help resist corrosion in service. Overall size is 77 mm (3.03 in) by 18 mm (0.71 in), with a 6.5 mm (0.26 in) square aperture to suit common budget lock formats and countersunk fixing holes drilled Ø5.5 mm (0.22 in) for flush screw seating. Suitable for trucks, trailers, vans and buses, as well as access panels, lockers and plant or boiler cabinets, this compact striker provides a clean closing face for the latch and is straightforward to fit during new body build or as a like‐for‐like replacement.
Key Features:
- Type: striker plate for budget locks
- Material: pressed mild steel, 1.5 mm (0.06 in) thick
- Finish: zinc plated with clear passivation for corrosion resistance
- Overall size: 77 mm (3.03 in) x 18 mm (0.71 in)
- Square aperture: 6.5 mm (0.26 in)
- Fixing: Ø5.5 mm (0.22 in) countersunk holes for flush fasteners
- Compact, low‐profile design for unobtrusive fitment
- Suitable for use across vehicle bodywork and equipment enclosures
Typical Applications:
Used as the keeper/striker for budget locks on truck and trailer bodies, van conversions, bus body panels and access doors. Also fitted to service lockers, plant and site equipment housings, and boiler or utility cabinets where a compact striker plate is required.
Also known as:
Budget Lock Keep; Keeper Plate; Catch Plate; Striker; ZP Striker; Zinc Plated Striker Plate
Product Specifications
| L&S Part No. | 800 1073 |
|---|---|
| Unit of Sale | 1 |
