Description
Overview:
This Snap Ring/Circlip 5 x 0.8 mm is a Genuine Stihl part designed to secure components on shafts or in bores and prevent axial movement under vibration and load. Made from hardened spring steel with a dark, corrosion-resistant finish, it provides a firm, elastic grip for reliable retention. The 5 mm nominal size with 0.8 mm section suits fine assemblies commonly found in Stihl hedge trimmers and Kombi attachments, including HL75 and HL75K. Dimensions: 5.0 mm x 0.8 mm (approx. 0.20 in x 0.03 in). As an OEM component it offers the correct fit and spring tension for Stihl mechanisms, helping maintain smooth operation and reduce premature wear. Suitable for professional and domestic users maintaining Stihl equipment to factory standards.
Key Features:
- Genuine Stihl OEM snap ring for assured compatibility and quality
- Precise 5.0 mm x 0.8 mm sizing (approx. 0.20 in x 0.03 in) for accurate fit
- Hardened spring steel construction for strength and long service life
- Securely prevents axial movement of shafts, pins, and bearings under load
- Consistent spring tension helps protect mating parts from wear
- Clean, low-profile form to suit compact housings and tight assemblies
- Straightforward installation with suitable circlip pliers, aiding quick maintenance
Typical Applications:
Used to retain pins, shafts, bushes, and bearing components in Stihl long-reach hedge trimmers and Kombi system gearheads and linkages. Suitable for securing small rotating or reciprocating parts where a 5 mm groove is specified, helping prevent drift and rattle in drive units, gearboxes, and control mechanisms across compatible Stihl machines.
Also known as:
Circlip, retaining ring, C-clip, snap clip. Often referred to as a piston circlip or internal snap ring in small-engine and gearbox contexts where it locates in a groove to hold a component axially.
Fits Models:
FH, HL, FH75, FH-KM, FH-KM 0-90 deg, FH-KM 135 deg, FH-KM 145 deg, FH-KM0-90deg, FH-KM135deg, FH-KM145deg, FHKM, FW20, FW20 Cart, FW20Cart, HEL 600, HEL 600 K, HEL 700, HEL 700 K, HEL600, HEL600K, HEL700, HEL700K, HL 95, HL 95 K, HL-KM, HL-KM 0-135 deg, HL-KM 0-145, HL-KM 0-90 deg, HL-KM0-135deg, HL-KM0-145, HL-KM0-90deg, HL100, HL100K, HL73, HL73K, HL75, HL75K, HL90, HL90K, HL91K, HL91KC, HL92C, HL92KC, HL94, HL94C, HL94K, HL94KC, HL95, HL95K, HLE 71, HLE 71 K, HLE71, HLE71K, HLKM
Alternate Part Numbers:
9461-620-0512, 94616200512
Product Specifications
| L&S Part No. | 9461 620 0512 |
|---|---|
| Part Type | Genuine Part |
| Manufacturer | Stihl |
| OEM No. | 94616200512 |
| Unit of Sale | 1 |
| Applications | FH-KM, FH-KM 0-90 deg, FH-KM 135 deg, FH-KM 145 deg, FH-KM0-90deg, FH-KM135deg, FH-KM145deg, FH75, FHKM, FW20, FW20 Cart, FW20Cart, HEL 600, HEL 600 K, HEL 700, HEL 700 K, HEL600, HEL600K, HEL700, HEL700K, HL 95, HL 95 K, HL-KM, HL-KM 0-135 deg, HL-KM 0-145, HL-KM 0-90 deg, HL-KM0-135deg, HL-KM0-145, HL-KM0-90deg, HL100, HL100K, HL73, HL73K, HL75, HL75K, HL90, HL90K, HL91K, HL91KC, HL92C, HL92KC, HL94, HL94C, HL94K, HL94KC, HL95, HL95K, HLE 71, HLE 71 K, HLE71, HLE71K, HLKM |
| Machine Type | Long Reach Hedgetrimmers |
| Fits Brands | Stihl |
| Fits Models | FW20 Cart | FH-KM 0-90 deg | FH-KM 135 deg | FH-KM 145 deg | HL-KM 0-90 deg | HL-KM 0-135 deg | HL-KM 0-145 | HL73, HL73K | HL75, HL75K | HL90K, HL90, HL95K | HL91K, HL91KC | HL92C, HL92KC | HL94, HL94C, HL94K, HL94KC | HL100, HL100K | HEL 600 K | HEL 600 | HEL 700 K | HEL 700 | HL 95, HL 95 K | HLE 71, HLE 71 K | FH 0° - 90 ° | FH 135° | HL 0° - 90° | HL 135° |
Reviews
Ask a Question
Compatibility
Customers also bought
-
![]()
Screw Sleeve for Stihl FH, HL - 4230 642 9010£1.81 £1.51 -
![]()
Lock for Stihl FH, HL Models - 4230 640 4513£31.90 £26.58
Related Products
-
![]()
Clutch Cable 53" Fits Camon C8 Rotovator - 580.47629£38.08 £31.73
